+86-15241797028
export@txinstruments.com
technique articles

PHBR-64 Chain Clamp Brinell and Rockwell Hardness Tester

PHBR-64 Chain Clamp Brinell and Rockwell Hardness Tester

PHBR series Chain Clamp Brinell & Rockwell Hardness Tester are designed and developed based on the PHR series Rockwell Hardness testers and follows the test method of the Brinell and Rockwell hardness test and function as both Brinell & Rockwell hardness tester.  which can tests accurately the castings, forgings, steels and nonferrous metal and work pieces made of all kinds of metal materials under kinds of heat treatment on-site. The test principle and accuracy comply to standard ISO6506, 6508 and ASTM E110. So it is usually Used for manufacturing inspection and acceptance inspection to replace Leeb hardness tester with lower accuracy.

Features of PHBR-64 Chain Clamp Brinell and Rockwell Hardness Tester

On-site Tesing
1                        On-site Tesing                        Testing the hardness of large pipes and shafts accurately on-site.                    
Anvils
2                        Anvils                        Testing various dimensions and shapes workpiece by using different anvils.                    
Application
3                        Application                        Chain fastened around the workpiece before the force is applied.                    
Relevant Standards
4                        Relevant Standards                        Comply to standard ISO6506,6508 and ASTM E18, E110.                    
Hardness Block
5                        Hardness Block                        Traceable standard hardness block.                    
Indenter
6                        Indenter                        Indenter inspected by standard Rockwell hardness tester.                    

Technical Parameters of PHBR-64 Chain Clamp Brinell and Rockwell Hardness Tester

package-8.JPG

Rockwell Initial Test Force: 10kgf

Rockwell Total Test Force: 60kgf, 100kgf, 150kgf

Brinell Test Force: 62.5kgf, 125kgf, 187.5kgf

Force Applying Method: By Screw

Indenter: 120°diamond cone

Ф1.588mm carbide ball 

Ф2.5mm, Ф5.0mm carbide ball

Accuracy: Meets the requirements of ISO 6506, 6508, ASTM E 110

Resolution: 0.5HR 

0.01mm for Brinell hardness (indentation diameter)

Testing Range: HRA, HRB, HRC, etc. 15 scales.

             Brinell hardness 8-650HBW

Application: Rockwell used for all metals including iron, steel copper, aluminium, etc.

Package of PHBR-64 Chain Clamp Brinell and Rockwell Hardness Tester

package.jpg