What are you looking for?

news center
  • The Chairman of TX Company Published Article The chairman of Shenyang Tianxing Instruments Co., Ltd. and the senior engineer Mr. Zhang Fenglin has been devoted himself to researching on-site metal hardness testing for more than 20 years ...
  • Introduction of Brinell Indentation Measurement System Testing Brinell indentation needs applying optical instrument to measure the size of indentation. The traditional testing method is to use the reading microscope shown as following. In recent years ...
  • Introduction of TX Barcol Impressor The Barcol impressor is also called Barker hardness tester, which is earliest produced by American Barber Colman company. The Barcol impressor consists of 934-1,935-1, and 936-1 etc. Among them ...
  • Introduction of TX Coating Thickness Gauge The thickness coating gauge is a portable instrument which is applied in testing the thickness of non-conductive coating on non-ferrous metal. The typical application is to measure the thickness of ...
  • Introduction of Magnetic Hardness Testers-1 1. The Earliest Magnetic Hardness Tester The earliest Magnestic hardness tester is the Electromagnetic hardness tester published by American patented 2693698 in 1945 ...
technique articles

PHR-1 Portable Rockwell Hardness Tester

PHR-1 Portable Rockwell Hardness Tester
PHR series portable Rockwell hardness tester complies with the basic designing principles of Rockwell hardness testing in accordance with international standard ISO6508, American Standard ASTM E18 and ASTM E110.

The hardness values can be read directly from the Rockwell hardness testers after rapid and accurate operations. It can be considered as a non-destructive testing with very small indentations. This kind of testers can be used at site to test the finished or semi-finished work pieces piece by piece in batches. Rockwell hardness testers are mostly applied in the metal-processing enterprises.

Features of PHR-1 Portable Rockwell Hardness Tester

Small and Light
1 Small and Light The tester is small and light. Its min weight is only 0.8kg.
Simple Operation
2 Simple Operation Operation as simple as micro-meter.
3 Convenient Used on table or take out.
High Reliability
4 High Reliability Designed by Rockwell hardness test method.
High Accuracy
5 High Accuracy As accurate as desk testers.Complying with ISO6508 and ASTM E18.
Traceable Test Block
6 Traceable Test Block Standard package including three standard Rockwell hardness blocks.
7 Indenter Certificated indenter by standard rockwell hardness tester.

Technical Parameters of PHR-1 Portable Rockwell Hardness Tester

Technical Parameters of PHR-1 Portable Rockwell Hardness Tester
Initial test force:10kg
Total test force:  60kg,100kg,150kg
Test head: 120┬░diamond cone indenter,1.588mm hard alloy ball
Indication error:  Complying with ISO 6508 and ASTME18
Repeatability error: Complying with ISO6508 and ASTM E18
Test resolution:  0.5HR
Test range: HRA,HRB,...HRV etc,15 scales.
Application range:Commom metal including iron and steel, Cu,Al,Ni,Ti,Pb,carburized layer and hard alloy,etc.

Relevant Standards of PHR-1 Portable Rockwell Hardness Tester
International Standard
International Standard of PHR-1 Portable Rockwell Hardness Tester
ASTM Standard
ASTM Standard of PHR-1 Portable Rockwell Hardness Tester

Package of PHR-1 Portable Rockwell Hardness Tester

Package of PHR-1 Portable Rockwell Hardness Tester