Search

What are you looking for?

English
+86-15241797028
export@txinstruments.com
news center
  • The Chairman of TX Company Published Article The chairman of Shenyang Tianxing Instruments Co., Ltd. and the senior engineer Mr. Zhang Fenglin has been devoted himself to researching on-site metal hardness testing for more than 20 years ...
  • Introduction of Brinell Indentation Measurement System Testing Brinell indentation needs applying optical instrument to measure the size of indentation. The traditional testing method is to use the reading microscope shown as following. In recent years ...
  • Introduction of TX Barcol Impressor The Barcol impressor is also called Barker hardness tester, which is earliest produced by American Barber Colman company. The Barcol impressor consists of 934-1,935-1, and 936-1 etc. Among them ...
  • Introduction of TX Coating Thickness Gauge The thickness coating gauge is a portable instrument which is applied in testing the thickness of non-conductive coating on non-ferrous metal. The typical application is to measure the thickness of ...
  • Introduction of Magnetic Hardness Testers-1 1. The Earliest Magnetic Hardness Tester The earliest Magnestic hardness tester is the Electromagnetic hardness tester published by American patented 2693698 in 1945 ...
technique articles

PHR-64 Chain Clamp Rockwell Hardness Tester

PHR-64 Chain Clamp Rockwell Hardness Tester
PHR Chain Clamp Rockwell Hardness Tester which can test the hardness of cylindrical workpieces   such as pipes, shafts, rollers accurately on-site. The test principle and accuracy comply to standard ISO 6508 and ASTM E110. Tested by National Institute of Metrology with tolorance <1.5HRC, equivalent to   bench hardness tester. So this kind of metal hardness tester is usually used for manufacturing inspection and acceptance inspection to   replace Leeb hardness tester with lower accuracy.

Features of PHR-64 Chain Clamp Rockwell Hardness Tester

On-site Tesing
1 On-site Tesing Testing the hardness of large pipes and shafts accurately on-site.
Anvils
2 Anvils Testing various dimensions and shapes workpiece by using different anvils.
Application
3 Application Chain fastened around the workpiece before the force is applied.
Relevant Standards
4 Relevant Standards Comply to standard ISO 6508 and ASTM E18, E110
Hardness Block
5 Hardness Block Traceable standard hardness block
Indenter
6 Indenter Indenter inspected by standard Rockwell hardness tester

Technical Parameters of PHR-64 Chain Clamp Rockwell Hardness Tester

Technical Parameters of PHR-64 Chain Clamp Rockwell Hardness Tester
Initial Test Force: 10kgf
Total Test Force: 60kgf, 100kgf, 150kgf
Force Applying Method: By Screw
Indenter: 120°diamond cone
Ф1.588mm carbide ball
Accuracy: Meets the requirements of ISO6508, ASTM E 18
Resolution: 0.5HR
Testing Range: HRA, HRB, HRC, etc. 15 scales.
Application: All metals including iron, steel copper, aluminium, etc.


Package of PHR-64 Chain Clamp Rockwell Hardness Tester

 Package of PHR-64 Chain Clamp Rockwell Hardness Tester