PHB-3000a Chain hydraulic Brinell hardness tester applies test condition with 3000kgf test force on a 10mm carbide ball indenter. The test condition and accuracy meet the requirements of ISO 6506 and ASTM E110 and can be used to test steel pipes, bearings, gas cylinders on site, replace inaccurate and unreliable Leeb hardness tester. It can also read the value of Brinell hardness directly after test with Brinell indentation measurement system.
On-site Testing. It could be operated in workshop for its simple operation, easy to carry, used in testing large cylinder work piece on site.
Permanent Indentation. Permanent indentation after test if for rechecking.
High Reliability. It completely follows Brinell hardness test principle, reflecting the mechanical property of the test material or parts, the same as desk testers.
High Accuracy. The test force accuracy complies with relevant regulations home and abroad, the same accuracy as desk tester.
| PHB-3000a | |
| Test Force | 3000 kgf (1000kgf,750kgf,500kgf optional) |
| Test Ball | 10mm Carbide ball (5 mm optional) |
| Test Range | 32~650 HBW |
| Test Diameter | ≤ 500 mm |
| Indicator Error | comply with ISO 6506, ASTM E110 |
| Repeatability Error | comply with ISO 6506, ASTM E110 |
| Test Force Error | ≤ ± 1％,complies with ISO 6506, ASTM E110 |
| Weight | 14.5 kg |
| Standard Assembly | Optional Accessories |
| Tester | Brinell hardness block(high or low value) |
| Load Handle | Carbide ball (5mm,10mm) |
| Brinell hardness block | Spare Parts Maintenance (hydraulic oil capsule, hydraulic oil, O-ring ect.) |
| 20x Reading Microscope | Maintaining Tools |
| 10mm Sapre Carbide ball | Other Specification Chains |
| Chain Measurign Frame | Brinell Indentation Measurement System |
| 1.3m chain |
English
