PHB-3000 portable Brinell hardness tester applies test condition with 3000kgf test force on a 10mm carbide ball indenter. The large indentation resulted by the tester can reflect the average value of combined influence affected by all the compositions of large materials. The testing result of this instrument is true and accurate with good repeatability and it has a good correspondence with tensile strength. The test condition and accuracy meet the requirements of ISO 6506 and ASTM E110 and can be used to test steel products, castings, forgings, nonferrous metals and semi-finished heat treatment parts on site.
On-site Testing. It could be applied in workshop, simple operation, easy carrying, and applied to too large parts for desk testers test.
Permanent Indentation. By 3,000kgf and 10mm test ball, the indentation is permanent for re-inspecting.
High Reliability. It follows Brinell hardness test method completely, replace Leeb testers which in low accuracy and reliability.
Wide Application Range. As long as clamped to the parts, it could test parts in any shape and size.
Wide Testing Range. It could test various common metal materials by its combination of different test force and test head.
| PHB-3000 | |
| Test Force | 3000 kgf (1000kgf, 750kgf, 500kgf optional) |
| Test Ball | 10mm Carbide ball (5 mm optional) |
| Test Range | 32~650 HBW |
| Opening Dimension | 350mm (Height) x 100mm (Depth) |
| Indicator Error | comply with ISO 6506, ASTM E110 |
| Repeatability Error | comply with ISO 6506, ASTM E110 |
| Test Force Error | comply with ISO 6506, ASTM E110 |
| Weight | 13.8 kg |
| Standard Assembly | Optional Accessories |
| Tester | Brinell hardness block(high or low value) |
| Handle | Carbide ball (5mm,10mm) |
| Brinell hardness block | Spare Parts Maintenance (hydraulic oil capsule, hydraulic oil, O-ring ect.) |
| Anvil(Flat,V-type,Dome type) | Maintaining Tools |
| 20x Reading Microscope | Brinell Indentation Measurement System |
| 10mm Spare Carbide ball |
English
